AnyBody Modeling System™ Publications

Rasmussen, J.; Damsgaard, M. (1997): Optimization of Biomechanical Multibody Systems. In: Gutkowski, W. & Mróz, Z. (eds.): Proceeding of the Second World Congress of Structural and Multidisciplinary Optimization, vol. 2, Institute of Fundamental Technological Research, Warsaw, Poland, ISBN 83-905454-7-0.

Rasmussen, J., Damsgaard, M. & Voigt, M. (1999): Joint load identification during cyclic movements. In: Pedersen, P. and Bendsøe, M.P.: Synthesis in bio solid mechanics. Kluwer Academic Publishers, ISBN 0-7923-5615-2

Rasmussen, J., Damsgaard, M. & Voigt, M. (1999): Ergonomic optimization of a bicycle. Presented at the Third World Congress of Structural and Multidisciplinary Optimization, Amherst, New York, USA, May 17-21, 1999.

Damsgaard, M., Rasmussen, J., & Christensen, S.T. (2000): Numerical simulation and justification of antagonists in isometric squatting. In: Prendergast, P.J., Lee, T.C., Carr, A.J. (2000): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, ISBN 0-9538809-0-7. Abstract (PDF). Poster (PDF).

Rasmussen, J., Damsgaard, M., Christensen, S.T. (2000): Inverse-inverse dynamics simulation of musculo-skeletal systems. In: Prendergast, P.J., Lee, T.C., Carr, A.J. (2000): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, ISBN 0-9538809-0-7. Abstract (PDF).

Damsgaard, M., Rasmussen, J., & Christensen, S.T. (2000): Bi-articular muscles as optimum force providers. In: Prendergast, P.J., Lee, T.C., Carr, A.J. (2000): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, ISBN 0-9538809-0-7. Abstract (PDF).

Rasmussen, J., Damsgaard, M., Christensen, S.T & Surma, E. (2000): Design optimization with respect to ergonomic properties. In: S.A. Meguid (Ed.): Mechanics and Materials in Design 3, Book of Abstracts, University of Toronto, ISBN 0-7727-4803-9.

Rasmussen, J. (2000): Biomekanisk simulering (in Danish). Teknisk Nyt Special, no. 21, TechMedia, ISSN 0909-5063.

Hartung, I. & Sjöström, J. (2000)Optimering av stakning i längdskidåkningens klassiska stil (in Swedish, with English abstract). Dissertation, Mid Sweden University, Frösön, Östersund, Sweden.

Rasmussen, J., Damsgaard, M. & Voigt, M. (2001): Muscle recruitment by the min/max criterion - a comparative numerical study. Journal of Biomechanics, vol. 34, no. 3, pp. 409-415.

Rasmussen, J. (2000): The AnyBody Project - modeling human motion by computer. Guest lecture at the Department of Mechanics, Vienna University of Technology, Vienna, Austria, 29 Nov. 2000.

M. Damsgaard, S.T. Christensen, and J. Rasmussen (2001): An efficient numerical algorithm for solving the muscle recruitment problem in inverse dynamics simulations. International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland. Extended abstract (PDF).

J. Rasmussen, M. Damsgaard, and S. T. Christensen (2001): Optimization of human motion: to invert inverse dynamics. International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland. Extended abstract (PDF).

J. Rasmussen, M. Damsgaard and S.T. Christensen (2001). Simulation of tendon energy storage in pedaling. MEDICON 2001, IX Mediterranean Conference on Medical and Biological Engineering and Computing. Pula, Croatia, June 12-15, 2001. Short paper (PDF).

J. Rasmussen, N. Lindsay, S. T. Christensen, M. Damsgaard (2001): Design optimisation of human exercises. The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 - 8, 2001 Dalian, China. Abstract (PDF). Extended Abstract (PDF).

Natalie Lindsay (2001): Modelling of the Shoulder Mechanism. A report describing the development of a three-dimensional biomechanical model of the human shoulder complex. Report no. 106, Institute of Mechanical Engineering, Aalborg University, Denmark. ISSN 0905-4219.

M. Damsgaard, J. Rasmussen & S.T. Christensen (2001): Inverse dynamics of musculo-skeletal systems using an efficient min/max muscle recruitment model. Proceedings of IDETC: 18-th Biennial Conference on Mechanical Vibration and Noise, Pittsburgh, September 9-13, 2001.

J Rasmussen (2001): Simulering af menneskelige bevægemønstre (in Danish). Teknisk Nyt Special, no. 25, TechMedia, ISSN 0909-5063.

Rasmussen. J. (2001): Kroppens Mekanik (in Danish), Naturens Verden, no. 4, Rhodos, ISSN 0028-0895.

Feng Gao, Michael Damsgaard, John Rasmussen & Søren Tørholm Christensen: Calculating Muscle Line-of-action for Musculo-skeletal Modeling. Biological Cybernetics, 87, no. 3, pp 199-210, 2002. 

Michael Damsgaard, John Rasmussen, Søren Tørholm Christensen, Egidijus Surma & Mark de Zee: AnyBody - a System for Biomechanical Analysis and Ergonomic Design. 2nd Max Planck Workshop on Engineering Design Optimization. Nyborg, Denmark, October 12-14, 2001. Short paper (pdf). Poster (pdf).

Mark de Zee, Søren Tørholm, Michael Damsgaard, and John Rasmussen: AnyBody - musculo-skeletal modelling system based on inverse dynamics and beyond. The Bionet event - Biomechanics in the decade of the bone and the joint. Brussels, 27-29 April, 2002. Abstract (pdf). Poster (pdf).

Christensen, S.T., M. Damsgaard, J. Rasmussen, and M. de Zee. Computer analysis of the mechanics of the human body. 15th Nordic Seminar on Computational Mechanics, Aalborg, Denmark, 18-19 October, 2002.

John Rasmussen, Vit Vondrak, Michael Damsgaard, Mark de Zee and Søren T. Christensen: The AnyBody project - Cmputer analysis of the human body. Computer Analysis of the Human Body. Biomechanics of Man 2002, pp. 270 - 274. The Czech Society of Biomechanics, Cejkovice, Czech Republic, November 13-15th, 2002. Paper (pdf).

Mark de Zee, Søren Tørholm, Michael Damsgaard, H.H.C.M. Savelberg and John Rasmussen: Optimization of ankle joint angle as a function of trunk angle in cycling. To be presented at the Fourth World Congress of Biomechanics, Calgary, Alberta, Canada, August 4 - 9th, 2002.

Bruno Wolff: Projekt AnyBody - Computermodel af bevægeapparatet (in Danish). Viadukt nr. 4, Hjælpemiddelinstituttet, September 2002. ISSN 0907-9181

Rasmussen, J., Damsgaard, M., Christensen, S.T., Surma, E.: Design optimization with respect to ergonomic properties. Structural and Multidisciplinary Optimization, 24, pp. 89-97, 2002.

Rasmussen, J., Damsgaard, M., Christensen, S.T., Gföhler, M., Angeli, T..: Design optimization of a pedaling mechanism for paraplegics. Structural and Multidisciplinary Optimization, 26, 132-138, 2004.

John Rasmussen, Michael Damsgaard, Egidijus Surma, Søren T. Christensen, Mark de Zee, and Vit Vondrak: AnyBody - a software system for ergonomic optimization. Fifth World Congress on Structural and Multidisciplinary Optimization, May 19-23, 2003, Lido di Jesolo - Venice, Italy.

Søren T. Christensen, Karl Siebertz, Michael Damsgaard, Mark de Zee, John Rasmussen, Gunther Paul: Human seat modeling using inverse dynamic musculo-skeletal models. Digital Human Modeling for Design and Engineering, Society of Automotive Engineers, Montreal, Canada, 16-19 June, 2003.

Mark de Zee, Thomas B. Andersen, Lone Hansen, Christian Wong, John Rasmussen, Erik Simonsen: Simulation of lifting using the better of two worlds: Forward and inverse dynamics. IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, 2003. 

John Rasmussen, Michael Damsgaard, Egidijus Surma, Søren T. Christensen, and Mark de Zee: Designing a general software system for musculoskeletal analysis. IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, 2003. 

Thompson, M.S., M. Voigt, and M. de Zee.: Evaluation of lower extremity musculo-skeletal model using sit-to-stand movement. In: Milburn, P. (ed.), University of Otago, International Society of Biomechanics XIXth Congress: the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., University of Otago, 2003, CD ROM Abstracts and Proceedings.

Wong, C., M. de Zee, T.B. Andersen, L. Hansen, E.B. Simonsen, and J. Rasmussen. Non-linear finite element analysis of a lumbar muscle spine model for two loadcases. In: Milburn, P. (ed.), University of Otago, International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., University of Otago, 2003, CD ROM Abstracts and Proceedings..

Holmberg, J., Wagenius, P. (2003): A biomechanical model of a double-poling skier. In: Milburn, P. (ed.), University of Otago, International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., University of Otago, 2003, CD ROM Abstracts and Proceedings.

John Rasmussen, Johan Dahlquist, Michael Damsgaard, Mark de Zee, and Søren T. Christensen: Musculoskeletal modeling as an ergonomic design method. International Ergonomics Association XVth Triennial Conference, August 24-29, 2003, Seoul, Korea.. 

Mark de Zee, Lone Hansen, Thomas B. Andersen, Christian Wong, John Rasmussen, Erik Simonsen: On the development of a detailed rigid-body spine model. International congress on computational bioengineering, Zaragoza, Spain, 24-26 September, 2003. 

E.Forster, U.Simon, M.Damsgaard, J.Rasmussen, P.Augat, L.Claes: Agreement of Muscular Activation and Hip Contact Forces Predicted with two Different Software Packages. 6th international symposium in biomechanics and biomedical engineering. February 25-28, 2004, Madrid.

J. Rasmussen, S.T. Christensen, M. Damsgaard, M. de Zee: The role of mechanics and optimization in ergonomics. 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, July 12 –13, 2004 .

Rasmussen. J. (2004): Software til menneskekroppens mekanik (in Danish), Teknisk Nyt Special, no. 37, Techmedia A/S, ISSN 0909-5063.

Dahlquist, Johan, Christensen, Søren Tørholm, Rasmussen, John, de Zee, Mark, Damsgaard, Michael (2004): The seated human - biomechanical modeling/ergonomic design. 2nd Nordic Seating Symposium, Oslo, Normay, 28 - 30 April 2004.

Rasmussen, J., Damsgaard, M., Christensen, S.T., de Zee, M., Dahlquist, J., Dhang, N. (2004): Musculoskeletal Modeling by Inverse Dynamics. The 14th European Society of Biomechanics Conference, 's-Hertogenbosch, The Netherlands, July 4-7, 2004.

Christensen, S.T., Rasmussen, J., Paul, G., Siebertz, K. (2004): Musculoskeletal shoulder model strength depends strongly on segment configuration. The 14th European Society of Biomechanics Conference, 's-Hertogenbosch, The Netherlands, July 4-7, 2004. Abstract PDF. (Please notice that the conclusions of this abstract are now deprecated. The shoulder model is now much more robust towards segment positions).

Dhang, N., Rasmussen, J., Damsgaard, M., Christensen, S.T., de Zee, M. (2004): Development of a Universal Lower Extremity Gait Model for the Computation of Muscle Forces. The 14th European Society of Biomechanics Conference, 's-Hertogenbosch, The Netherlands, July 4-7, 2004.

Siebertz, K., Christensen, S.T., Rasmussen, J. (2004): Biomechanische Simulationsmodelle zur Muskelkraftberechnung (in German). Sitze im Automobil, Euroforum, 8-9 July, 2004, Stuttgart, Germany.

E. Forster, U. Simon, M. Damsgaard, J. Rasmussen, P. Augat, L. Claes (2004): Agreement of muscular activation and hip contact forces predicted with two different software packages. 11th Workshop on The Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields. University of Ulm, Department of Orthodontics, July 14th -15th, 2004.

Rasmussen, John, Christensen, Søren Tørholm, Dahlquist, Johan, Damsgaard, Michael, de Zee, Mark (2004): AnyBody - A quantitative ergonomic design method. In: Olsen, K.B. and Teller, O.J.: Nordic Ergonomics Society, 36th Annual Conference "NES2004" Proceedings, Kolding, Denmark, 16 - 18 August. ISBN 87-990306-0-8.

Gielo-Perczak, K., Rasmussen, J., and Tørholm Christensen, S., “An Analysis of Load Transmission Within The Human Body During Pushing and Pulling,” Proceedings of the XVIII Conference of the International Society for Occupational Ergonomics and Safety, Houston, TX, CD, Group 10, pp. 4-8, 2004. ISBN: 0-9652558-1-6.

Forster, E. (2004): Predicting muscle forces in the human lower limb during locomotion. The Medical Faculty, University of Ulm, Germany: http://vts.uni-ulm.de/query/longview.meta.asp?document_id=3722. (Please notice that is an official publication of the University of Ulm. The link is provided here with the author's kind permission).

Eshuis, Peter (2004): Knee Modelling. The AnyBody Research Project and Universiteit Twente.

Lund, Marie (2005): Biomechanical study of cross-country skiing. Master’s thesis in Engineering Physics carried out at Mid Sweden University, Department of Engineering, Physics and Mathematics, Östersund, Sweden.

J. Rasmussen, M. Damsgaard, S.T. Christensen and M. de Zee (2005): AnyBody - decoding the human musculoskeletal system by computational mechanics. Invited paper. Konferanse i beregningsorientert mekanikk (computational mechanics). Trondheim, Norway.

John Rasmussen, Søren Tørholm Christensen, Michael Damsgaard and Mark de Zee (2005): Ergonomic optimization of a spring-loaded bicycle crank. 6th World Congress on Structural and Multidisciplinary Optimization. Rio de Janeiro, Brazil.

John Rasmussen, Michael Damsgaard, Søren Tørholm Christensen and Mark de Zee (2005): Challenges In Musculoskeletal Modeling For Clinical Use. XXth Congress of the International Society of Biomechanics. Cleveland, Ohio, USA.

John Rasmussen, Mark de Zee, Michael Damsgaard, Søren T. Christensen, Clemens Marek and Karl Siebertz (2005): A General Method for Scaling Musculo-Skeletal Models. 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA. Abstract (pdf). Poster (pdf).

Mark de Zee, Paolo M. Cattaneo, Michel Dalstra, John Rasmussen and Birte Melsen (2005): On the Development of a Rigid-Body Model of The Mandible. 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA.

John Rasmussen, Mark de Zee, Michael Damsgaard, Søren T. Christensen (2005): Ergonomic Optimization of a Bicycle Crank Based on Musculoskeletal Modeling. 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA.

John Rasmussen and Soeren Toerholm Christensen (2005): Musculoskeletal Modeling of Egress with the AnyBody Modeling System. SAE 2005 Transactions Journal of Passenger Cars - Electronic and electrical systems, pp. 822-828, 2005.

Mark de Zee, John Rasmussen, Jeroen Lem, and Karl Siebertz (2005): Computer Simulations of the Active Motion System with Musculo-skeletal Models. SAE 2005 Transactions Journal of Passenger Cars - Electronic and electrical systems, pp. 272-278, 2005.

Karl Siebertz, Søren T. Christensen, John Rasmussen: Biomechanical Car Driver Models to Analyze Comfort. 5th International CTI Conference Automotive Seats. Wiesbaden, Germany, July 4-6, 2005.

John Rasmussen: Musculoskeletal Simulation - (Dis)comfort evaluation. Sound and Vibration, May 2005. ISSN 1541-0161.

Christine Schärer (2005): Muskuloskeletale Belastung und Beanspruchung des Femurs während des Gangzyklus: Entwicklung und Vergleich unterschiedlicher Belastungsund Materialmodelle. Diploma Thesis, Department of Biology, ETH Zürich.

Sarah R. Sullivan, Noshir A. Langrana and Sue Ann Sisto (2005): Multibody computational biomechanical model of the upper body. Proceedings of IDETC/CIE 2005. ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. September 24-28, 2005, Long Beach, California USA.

John Rasmussen, Soeren Toerholm Christensen, Karl Siebertz and Jessica Rausch (2006): Posture and Movement Prediction by Means of Musculoskeletal Optimization. SAE Congress: Digital Human Modeling for Design and Engineering (DHM): Lyon, France.

Lone Hansen, Mark de Zee, John Rasmussen, Thomas B. Andersen, Christian Wong, Erik B. Simonsen (2006): Anatomy and biomechanics of the back muscles in the lumbar spine with reference to biomechanical modelling. Spine, 31, 1888-1899.

J. Rausch, K. Siebertz, S. T. Christensen, J. Rasmussen (2006): Simulation des menschlichen Bewegungsapparates zur Innenraum-gestaltung von Fahrzeugen. VDI Fahrzeug- und Verkehrstechnik, 13. Internationaler Kongress und Ausstellung, 27. – 28. September 2006, Würzburg, September 2006.

Michael Skipper Andersen, Michael Damsgaard, John Rasmussen (2006): Marker-based motion reconstruction of constrained rigid-segment systems. Ninth International Symposium On the 3D Analysis Of Human Movement, 28-30 June, Valenciennes, France.

Vit Vondrák, John Rasmussen & Michael Damsgaard (2006): Algorithms for solution of muscle recruitment and contact problems in musculoskeletal simulation. MAFELAP (Conference on the Mathematics of Finite Elements and Applications) 2006,  Brunel University, London, 13 – 16 June 2006.

Janneke Annegarn (2006): Scaling in human simulation models Developing an isometric strength scaling model from easy accessible data. Master’s Thesis, Maastricht University, Master of physical activity and health science, Faculty of health science.

P. de Jong, M.de Zee, P.A.J.Hilbers, H.H.C.M. Savelberg, F.N. van de Vosse, A. Wagemakers, K. Meijer (2006): Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence. Master’s thesis Medical Engineering, TU/e Biomodelling and bioinformatics, UM movement sciences, Aalborg University.

Annegarn J, Rasmussen J, Savelberg HHCM, Verdijk LB, Meijer K (2006): Scaling strength in human simulation models. 11th Symposium of the Flemish Society of Kinesiology, 20th September 2006, University Antwerp.

Michael Damsgaard, John Rasmussen, Søren Tørholm Christensen, Egidijus Surma, and Mark de Zee (2006): Analysis of musculoskeletal systems in the AnyBody Modeling System. Simulation Modelling Practice and Theory. Volume 14, Issue 8 , November 2006, Pages 1100-1111. Elsevier, ISSN: 1569-190X.

John Rasmussen, Mark de Zee, Michael Damsgaard, Søren Tørholm Christensen, Michael Skipper Andersen (2006): Musculoskeletal simulation of orthopedic surgical procedures. In: Karol Miller and Dimos Poulikakos: Computational Biomechanics for Medicine. MICCAI 2006, Copenhagen, Denmark, Workshop Proceedings. Samfundslitteratur. ISBN 10: 87-7611-149-0. (Poster (pdf))

Zee, Mark De ; Cattaneo, P.M. ; Dalstra, M. ; Rasmussen, John ; Svendsson, P. ; Melsen, B. (2006): Joint Forces in a Mandible with Unilateral Hypoplasia Before and After Mandibular Distraction Osteogenesis: a Simulation Study Using a  Patient-Specific Musculo-Skeletal Model.  Konferencen: World Congress of Biomechanics, nr. 5th, Munich, Tyskland, 29 July - 4 August, 2006.

Michael Skipper Andersen, Michael Damsgaard, Søren Tørholm Christensen, John Rasmussen (2006): Kinematic Analysis of Over-determinate Systems (2006). 19th Nordic Seminar on Computational Mechanics, 20-21 October, Lund, Sweden. (Abstract (pdf))

John Rasmussen: Computermodel af det siddende menneske. Hjælpemidlet, nr. 4, 2006, pp. 6-7. ISSN 1603-7138.

Mark de Zee, Lone Hansen, Christian Wong, John Rasmussen, Erik B. Simonsen (2007): A generic detailed rigid-body lumbar spine model. Journal of Biomechanics, 40, 1219–1227.

Mark de Zee, Michel Dalstra, Paolo M Cattaneo, John Rasmussen, Peter Svensson, Birte Melsen (2007).Validation of a musculo-skeletal model of the mandible and its application to mandibular distraction osteogenesis. Journal of Biomechanics, 40, 1192–1201.

Annegarn J, Rasmussen J, Savelberg HHCM, Verdijk LB, Meijer K (2007): Strength scaling in human musculoskeletal models. European Workshop on Movement Sciences. May 31 to June 2, 2007, Amsterdam, the Netherlands.

Yoann Collet, John Rasmussen, Natalia Nuño, Patrice Tétrault, Nicola Hagemeister (2007): Computational Modeling of the shoulder and improvement of a new prosthetic design for massive rotator cuff tears: our experience with the AnyBody Modeling System. The 18th IASTED International Conference on Modelling and Simulation, May 30 – June 1, 2007 Montreal.

Mark de Zee, Deborah Falla, Dario Farina, and John Rasmussen (2007): A detailed rigid-body cervical spine model based on inverse dynamics. International Society of Biomechanics 11th congress, Taipei, Taiwan.

John Rasmussen, Mark de Zee, Søren Tørholm, and Michael Damsgaard (2007): Comparison of a musculoskeletal shoulder model with in-vivo joint forces. international Society of Biomechanics 11th congress, Taipei, Taiwan.

M. S. Andersen, T. Alkjær, J. Rasmussen and M. Damsgaard (2007): Marker Position Determination and Kinematic Analysis of a Patient-specific Lunge Model. International Society of Biomechanics 11th congress, Taipei, Taiwan.

Michael S. Andersen, Michael Damsgaard, John Rasmussen (2007): Construction of smooth time-varying weight functions to handle occasionally occluded markers in musculoskeletal models. 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan.

John Rasmussen, Mark de ZeE, Michael Damsgaard, Søren Tørholm (2007): Can AnyBody do the limbo? 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan.

Mark de Zee, Deborah Falla, Dario Farina and John Rasmussen (2007): Prediction of neuromuscular adaptation of experimentally induced neck pain using a musculoskeletal model. 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan.

Dan Karlsson, Anna-Lisa Osvalder and John Rasmussen (2007): Towards better seating design – a discussion and comparison between office chairs and car seats. Nordic Ergonomics Society Conference 2007, Lysekil, Sweden.

John Rasmussen, Mark de Zee & Søren Tørholm (2007): Muscle Relaxation and Shear Force Reduction may be Conflicting: a computational model of seating. SAE Congress: Digital Human Modeling for Design and Engineering (DHM): Seattle, Washington, USA.

Michael Skipper Andersen, Michael Damsgaard John Rasmussen (2007): Scaling and Local Marker Coordinate Determination of Musculoskeletal Systems. SAE Congress: Digital Human Modeling for Design and Engineering (DHM): Seattle, Washington, USA.

Dan Karlsson, Anna-Lisa Osvalder and John Rasmussen (2007): Is Sitting a Problem? - On the Development of Improved Ergonomic Seating. Work with Computing Systems Conference, Stockholm, Sweden. ISBN 978-91-633-0881-9

L. J. Holmberg, A. M. Lund (2006): Possibilities with using computer simulations for double-poling biomechanics. Poster presentation at the International Congress on Science and Nordic Skiing, June 18.-20.2006, Vuokatti, Finland

Holmberg L. J., Lund A. M., (2007): Using double-poling simulations to study the load distribution between teres major and latissimus dorsi. In: Science and Nordic Skiing (Eds: Vesa Linnamo, Paavo V. Komi and Erich Müller), ISBN: 978-184126-229-1, Meyer & Meyer Sport, Oxford, UK.

Lund A. M., Holmberg L. J., (2007): Which are the antagonists to the pectoralis major muscle in 4th gear, freestyle technique, cross-country skiing? In: Science and Nordic Skiing (Eds: Vesa Linnamo, Paavo V. Komi and Erich Müller), ISBN: 978-184126-229-1, Meyer & Meyer Sport, Oxford, UK

Nolte A., Augat P. (2007): Untersuchung der Muskel- und Gelenkkräfte im Schultergelenk mithilfe eines Simulationsmodells der Software AnyBody. Diplomarbeit, Biomechanisches Forschungslabor der Berufsgenossenschaftliche Unfallklinik Murnau und der Paracelsus Medizinischen Privatuniversität Salzburg; In Zusammenarbeit mit der Firma CADFEM GmbH, Grafing b. München

Michael S. Andersen, Michael Damsgaard, John Rasmussen, (2007): A study of The Effects of Two Different Kinematical Analysis Methods on the Calculated Muscle Activities in an Inverse Dynamics-based Musculoskeletal Model of Gait. 20th Nordic Seminar on Computational Mechanics, Gothenburg, Sweden.

Krystyna Gielo-Perczak and John Rasmussen (2007): Biomechanical modeling of the shoulder anatomy. In: Shrawan Kumar (Ed): Biomechanics in Ergonomics, Second Edition. pp 395-404. CRC Press. ISBN 0-8493-7908-3

John Rasmussen (2007): AnyBody: CAE for the human body. In: Conference Proceedings, ANSYS Conference & 25. CADFEM Users´ Meeting. CADFEM GmbH, ISBN 3-937523-04-9

Mark de Zee, Deborah Falla, Dario Farina and John Rasmussen (2007): Simulation of pain-induced alterations in cervical motor control. World Congress on Neck Pain. January 20 - 22, Los Angeles, California, USA. Poster (5 MB).

Paul Taylor, Karl Stoffel and John Rasmussen (2008): A Computational Model of Clavicle Fracture Fixation. Abstract. Poster (7 MB). 16th Annual Symposium on Computational Methods in Orthopedic Biomechanics. University of California at San Francisco, March 1, 2008.

David Wagner, John Rasmussen, Matthew Reed (2008): Assessing the Importance of Motion Dynamics for Ergonomic Analysis of Manual Materials Handling Tasks using the AnyBody Modeling System. Transactions Journal of Passenger Cars: Mechanical Systems. Vol. 116, no. 6. Society of Automotive Engineers. ISBN 978-0-7680-1985-8.